SAKURA SE-3250B
13
INSTALLATION
1. 50 mm space should be left around the hole and there are ventilation outlets (refer to figure
1). The worktop should be at least 30mm thick and made of heat resistant material.
- Glass Size: 730 x 430mm
- Cut Size: 680 x 380mm
2. It is essential that the hob is well ventilated and that the air intake and exit are not blocked.
3. Make sure the hob is correctly installed as shown in Figure 2.
POWER CONNECTION
The socket should be connected in
compliance with the relevant standard to a
single pole circuit breaker the method of
connection is shown in Figure 3.
(1). If the cable is damaged or needs replacing, this should be done by an after sales technician
using the proper tools so as to avoid any accidents.
(2). If the appliance is being connected directly to the mains supply an omnipolar circuit
breaker must be installed with a minimum gap of 3mm between the contacts.
