background image

5.MAINTENANCE

Check the water supply device and the release often. You should avoid the
condition of no water or air entering into system, as this will influence unit s
performance and reliability. You should clear the pool/spa filter regularly to
avoid damage to the unit as a result of the dirty of clogged filter.

The area around the unit should be dry, clean and well ventilated. Clean the
side heating exchanger regularly to maintain good heat exchange as conserve
energy.

The operation pressure of the refrigerant system should only be serviced by
a certified technician.

Check the power supply and cable connection often, should the unit begin to
operate abnormally, switch it off and contact your certified technician.

Discharge all water in the water pump and water system, so that freezing of
the water in the pump or water system does not occur. You should discharge
the water at the bottom of water pump if the unit will not be used for an
extended period of time. You should check the unit thoroughly and fill the
system with water fully before using it for the first time after a prolonged
period of no usage.

SAKURA - Total Air Conditioning Solution

SAKURA CORPORATION

Tel: +81-45-949-8550   Fax: +81-45-949-8551

2-17-1, Eda-minami, Tsuzuki-ku, Yokohama, Kanagawa,224-0007, Japan

E-mail: [email protected]   Web: www.sakura-aircon.com    

Содержание AXSP-260HA











Отзывы: