3
Assembling Your Device
After opening the device packaging, make sure that all of the accessories are present.
To fully assemble your tracking band, slide the receiver into the wrist band as shown in the graphic below.
Then push the receiver down so that the clasp enters the two holes that best allow your wristband to fit
comfortably, yet securely.
Charging Your Device
Your tracking band must be charged before using. In order to charge, follow the steps below:
1.
Remove the receiver piece from the wristband.
2.
Insert the receiver piece into an available USB port on your computer.
3.
Charging the product may take about two hours for a full recharge.
