Sakai SW880-1, Руководство по ремонту

Страница: 267 / 428

11-057
TROUBLESHOOTING
2-4-1. Engine will not start (Starter motor does not run) 17/17
F-R lever must be in “N”.
Parking brake switch must be applied.
Foot brake switch must be ON (Brake pedal is not depressed).
Check whether exact meter multiple display shows any error code.
2) when display shows no error code
Reference Fig.: 2-4-1
Check point Check/Cause Action
14. Starter Lockout Relay (1) when starter switch is ON, measure voltage between
starter lockout relay terminal 1 inlet wire LR and chassis
ground.
Standard voltage : 12 V or more
(2) when starter switch is START, measure voltage
between starter lockout relay terminal 3 inlet wire BY
and chassis ground.
Standard voltage : 12 V or more
(3) when starter switch is START, measure voltage
between starter lockout relay terminal 5 outlet wire BR
and chassis ground.
Standard voltage : 12 V or more
If above items (1) and (2) are OK and item (3) is NG,
starter lockout relay is faulty.
•
Replace starter switch
relay.
15. Starter Switch Relay (1) when starter switch is ON, measure voltage between
starter switch relay terminal 1 inlet wire BR and chassis
ground.
Standard resistance : 12 V or more
(2) when starter switch is ON, measure voltage between
starter switch relay terminal 3 inlet wire LgR and
chassis ground.
Standard resistance : 12 V or more
(3) when starter switch is ON, measure voltage between
starter switch relay terminal 5 outlet wire GB and
chassis ground.
Standard voltage : 12 V or more
If above items (1) and (2) are OK and item (3) is NG,
starter switch relay is faulty.
•
Replace starter switch
relay.
16. Harness Connecting
Between Terminals
Measure resistance of harness connecting between
terminals.
Standard resistance : 10 Ω or less
If resistance is abnormal, harness is faulty.
•
•
Repair or replace
harness.
•
•
•
•