2. OPERATION
2.3 Operation
___ A
WARNING
This machine is a one-man roller.
Operate the machine from the operator's seat.
2.3.1 Before-starting inspection
1) Check that the steering lock bar is in the carrying
position.
A
WARNING
Make sure that the steering lock bar is connected
in the carrying position before putting the machine
in motion. Steering is impossible if the bar is in the
steering lock position.
The bar is located at the left of the center of the
machine.
To unlock the bar:
0
Remove the spring pin.
©Pull out the lock pin.
0
Set the bar in the carrying position.
NOTE: Retain the lock bar in the locked position by
inserting the lock pin into the lock holes. Fix the lock
pin with the spring pin.
2) Check that the F-R lever is in the neutral position (N).
NOTE:
The engine does not start if the F-R lever is not in
the neutral position (N).
-30-
