2. OPERATION
2.1.3 Switches
Starter switch
Starts and stops the engine.
HEAT: When the engine is cold, hold the starter switch
in the HEAT position, the heater indicator lamp
will go on. Stay in that position until the indicator
lamp goes off. Release the switch key when the
indicator lamp goes off. The key will automatically
return to the OFF position. Turn the key to the
START position to start the engine.
OFF: The key can be removed in this position. All the
electric systems are switched off. To shut down
the engine, move the key to this position.
ON:
The charging circuit and lamp circuit are charged with electricity. Let the key stay in
this position after the engine has started.
START: The engine is cranked and gets started. The moment the engine has started, release
the key. It will automatically return to the ON position.
Lamp switch
Has three positions.
0:
All lamps are switched off.
Side marker lamps and tail lamps come on.
In addition to the above-mentioned lamps, the
headlamps become bright. For high beam, move
the turn signal lever up. For low beam, move it
down.
Turn signal lever
Turn signal lamp flashes when the turn signal lever is
operated.
Left turn: Move the lever forward.
Right turn: Move the lever backward.
NOTE:
The lever does not return to the OFF position
even if the steering wheel is turned back.
I
Head lamp beam'
I
Turn signal lamp'
Right turn
—
21
—
