SAJ Sununo-TL Series, Руководство пользователя

Страница: 25 / 31

User Manual
43
User Manual
44
7.2.8 History Errors
When enter the History Errors menu if one or more error had happened, we can
see the error occurred time. Move the cursor to the desired error time, press
ENT to see the detailed error information (see the above table)
7.2.9 Set-Param
Note: Every parameter is effective after the below menus have been confirmed.
Language :
The inverter will support multi language:English, German and French etc. in
the future, please refer to SAJ service people for latest information. Press “
▼
or “
▲
button
Date :
This setting includes year, month and date”. to
choose one of the items: year/ month/date, press ENT to make the cursor “^”
point to the selected item. Then
to set the parameter.
Press ENT to confirm this item setting, then it automatically points to the next
item setting. Repeat the operation steps to set other item.
”
” to choose one language. Press ESC or ENT to exit when “Set
Complete!” appears.
“ Press “
▼
” or “
▲
” button
press “
▼
” or “
▲
” button
>
11/11/09 12:00
11/11/07 15:12
Set complete!
Are you sure
to set it?
Date: 2011/10/31
^
Ethernet :
The inverter system can get an IP address by using DHCP (Dynamic host
configuration protocol) when out of factory. If the action fails in 40 seconds, the
system will use the default address:192.168.1.111
(
gateway
:
192
.
168
.
1
.
1,
Subnet mask
:
255
.
255
.
255
.
0
)
.
If user manually set an IP address, the system will use it all the time. To recover
the IP by using DHCP, User can configure the inverter to obtain the IP address
automatically, then the inverter will automatically restart and adopt DHCP to get
the IP address.
The manual setting step is as follows:
Enter the Ethernet->manual setting menu, and press “
▼
” or “
▲
” button to set
every figure, press ENT to confirm, and then it automatically points to next figure.
When all the figures have been set, “Are you sure to set it?” will appear; press
ENT to confirm it. Press ESC or ENT to exit when “Set Complete!” appears.
:
Do not support this function temporary.
:
User can change the password by the “Change Password” menu.
:
Wifi
Change Password(Only for SAJ or SAJ representative)
Clear Errors
Be caution that this operation will clear up the history error records.
If user wants to clear up the history error records, move the cursor and press ENT
to enter the sub-items, press ENT to confirm the setting when the below menu
occurs. Press ESC or ENT to exit when “Set Complete!” appears.
Time
：
15:48:28
^
L a n g u a g e [ 0 ]
0:EN 1:GE 2:FR
Time :
This setting includes “hour, minute and second”.
Please refer to the operation steps of “Date Setting”.
Grid Compliance(Only for SAJ or SAJ representative):
The Gird Compliance may be different in the different countries. If the chosen
country of “Grid Compliance” is incorrect, we can modify it by this menu.
Enter to the “Gird Compliance” and confirm the password, then press“
▼ ”
or“
▲ ”
button to select the country. Please press “ENT” button to confirm
after finish the selection.
When the three items have been set, “Are you sure to set it?” will appear; press
ENT to confirm it. Then press ESC or ENT to exit when “Set Complete!”
appears.
Permanent
Error
* “Master” is inverter’s main controlling and processing unit.
* “Slave” is inverter’s subordinate controlling and processing unit.
S
S
M
M
M
M
M
M
M
M
Type of Error
Error
Varistor Err
2.5V Ref Err
Other Err
CurrSensor Err
GFCI Dvc Err
Int. Comm Err
E2PROM R/W Err
2.5V Ref Err
DCI Device Err
Relay Err
Explanation
Varistor Error (Slave)
2.5V Ref Error (Slave)
Other Error (Master)
Current Sensor Error (Master)
GFCI Device Error (Master)
Internal Communication Error (Master)
E2PROM R/W Error (Master)
2.5V Ref Error (Master)
DCI Device Error(Master)
Relay Error (Master)