SAJ Sununo-TL Series, Руководство пользователя

Страница: 20 / 31

User Manual
33
User Manual
34
Connection Procedures
1 、 Inverter 1 connects to Inverter 2 through RS485 cable; Inverter 2 connects
to Inverter 3 through RS485 cable . In the same way to connect all inverters .
2 、 Inverter 1 connects to RS485 / 232 Module through RS485 - M cable or
connects to SAJ Logger through RS485 - C cable .
3 、 Connect RS485 / 232 Module to PC's RS232 port , or connect SAJ Logger
to PC through Router .
4 、 Open the internal web server of SAJ logger for plant and inverter monitoring.
6
.
6
.
2 Communication through Ethernet RJ45
When users choose Ethernet communication solution , users can access to
Inverter real - time information through Inverter IP address , or through SAJ
Logger IP address . The configuration is shown in Figure6.22 as below :
6 . 6 . 3 Cable Assembly Instructions
Cable : All cables mentioned in this Manual are 5E Shielded Cable , as shown in
Figure6.23 :
Terminals
：
According to different communication solutions
,
users may need
at least one of the below terminals . They are 3Pin Connector and RJ45 Plug as
shown in Figure6.24 and Figure6.25 .
Figure 6.24 3Pin Connector
Figure
6.22 Communication through Ethernet RJ45
Figure 6 . 23 5E Shielded Cable
Four STP
Shield layers