M2 Series Micro-inverter
23
24
(5) Lay the AC trunk cables on the guide rail and fix it with ties.
Figure 4.12
Fixing the cables with ties
Step 3: Complete AC Connection
(1) Insert the branch cable connector on output side into the AC trunk cable or branch male connector until a
"click" sound is heard.
Click
Click
Figure 4.13
Multi-machine system
Click
Grid
Figure 4.14
Single-machine system
(2) Connect the end of the AC cable to the distribution box and then connect it to the local power grid.
(3) If there is an empty port on the bus box, please insert the main cable protective cover into the empty port
to ensure that the connector is dust-proof and waterproof.
Click
Figure 4.15
Single-machine system
Note: If you need to remove the output-side AC connector of the microinverter from AC trunk cable, please
insert the branch connector unlock tool into the AC branch cable connector.
Figure 4.16
Single-machine system
Step 4: Make an Installation Map
Peel off the SN label on each microinverter and attach the SN label to the installation map as followed
Figure 4.17
SN label and installation map
