77
After use
1
Switch the cleaner off and unplug
from the socket. Wait until the
cleaner has cooled down
completely.
2
Release any steam pressure by
pressing the steam trigger on the
handle.
3
Apply the steam safety lock.
4
Remove the filler cap.
5
Empty the water tank. Allow the
inside of the water tank to dry out
before replacing filler cap.
Rinsing the water
tank
To clean the water tank fill it with
clean water and shake vigorously.
This will release any limescale
deposits that have collected on
the bottom of the tank. Pour the
water out by holding upside down.
Descaling
In order to prolong the life of your
cleaner you should descale the
steam tank at least every 6
months.
1
Switch the cleaner off, unplug and
allow to cool.
2
Empty any water out of the tank.
3
Mix the descaler in the measuring
jug using warm water. We
recommend using 50gm of citric
acid crystals per 1 litre of water.
Citric acid crystals are available
from most pharmacies.
4
Pour 1 litre of the descaler solution
into the tank.
5
Fit the cap and tighten fully.
6
Using the handle, move the steam
cleaner about to swill the solution
around the tank.
7
Leave for 30 minutes.
8
Empty the solution carefully.
9
Rinse the tank with clean warm
water, then empty.
10
Wipe the outside of the cleaner
with a damp cloth to remove all
traces of descaler solution.
Warning: Do not switch on the
heater with the descaling
solution inside.
Cleaning and
maintenance
77
Attention:
Water tank is under pressure.
Keep the button pressed to allow the steam to escape.
Pull the plug from the wall socket.
Allow the device to cool down for 5 minutes before refilling.
Always open the screw top slowly when opening the water tank,
this will allow any remaining steam to escape gradually.
