Saivod SAP 717, Руководство пользователя

Страница: 80 / 88

28"(520mm) H≤36.5"(927mm)
36.5"(927mm) H≤64"(1625mm)
2
3
4
4
3
2
H≤28"(520mm)
Installation in a sliding sash window
1. Cut the sponge B to a proper length and attach it to the window stool .
sponge B (adhesive)
sponge B (adhesive)
2. Open the window; place the window panel on the window s tool vertically; slide the adjust-
ment plate to make the window panel close to the window s tools at the upper and lower
side of window; fix the window panel on the windowsill with screws and clips of rear conn-
ection plate. (required quantity is shown in the sheet below)
Window height (H) Screw quantity Clip quantity
window s tool
window
sash
window
sash
clip of rear
connection
plate
Window
height (H)
windowsill
3. Cut the sponge B to a proper length and attach it to the window panel .
4. Close the window securely against the window panel .
5. Cut the sponge A to a proper length and seal the gap between left side of inner window
sash and outer window sash.
6. Fix the inner window with window bracket and screw, so that it can not slide horizontally.
outer window
sponge A
inner window
plastic window
wooden window
window bracket
80