Saitek PZ35, Руководство пользователя

Страница: 6 / 32

see the Saitek Pro Flight Rudder Pedals. Click on this controller - the menu will now disappear and the Saitek Pro
Flight Rudder Pedals will appear as the entry in the joystick type box.
•
Next, in the assignment list in the middle of the page, scroll down until you find the entry on the left, that says Left
Brake Axis. Next to the left brake axis there should be an entry that says Left toe, and next to this there should be
a box that has a tick in it. If it does not, hover over the box with your mouse pointer and left click - a tick should
now appear in the box. You also need to carry out this procedure for the Right Brake Axis.
• Once this is done click on OK to go back to the main settings screen.
• From the main setting screen click on the sensitivities icon.
• From the Controller - Sensitivities page click on the drop arrow next to the box called Joystick Type in the upper
right of the screen. When the arrow is pressed a drop-down menu will appear listing all the game controllers
connected to your PC. In this list you will see the Saitek Pro Flight Rudder Pedals. Click on this controller and the
menu will now disappear and be replaced by the Saitek Pro Flight Rudder Pedals.
• On the screen you will see Simple and Advance radial buttons. Make sure the Simple radial is selected - if not
move your mouse over the radial button and left click - a dot will appear in the radial.
• Just under and to the right of the simple radial button, you will see two sliders, one marked Sensitivity - all axes
and the other marked Null zone - all axes. Move the sensitivity slider all the way over to the right and move the
null zone slider about 3% down the slider. To move the slider, simply left click and hold on it and move to desired
setting.
• Once this has been done click OK to go back to the main settings screen. From here you can choose an option
from the menu on the right of the page.
Lock On
We have included some tips below on configuring your Saitek Pro Flight Rudder Pedals for Lock On. For more
detailed instructions please consult your Lock On manual.
• In the Input settings page make sure you have selected the Saitek Pro Flight Rudder Pedals in the devices drop-
down menu.
• Make sure the Input is set to Axes and not Buttons.
• In the command list make sure that the only axis assigned is the Rotator2 axis which is assigned to the rudder.
• To change or delete an axis assignment from the control list, click on the control name on the left, then click
either clear or change from the top of the page.
• To test the rudder axis, make sure the test panel icon on the right side of the page is set to on.
• The Axis / Slider switch should be set to Axis.
Pacific Fighters, IL2 and IL2 Expansion Packs
We have included some tips below on configuring your Saitek Pro Flight Rudder Pedals for Pacific Fighters, IL2 and
IL2 Expansion Packs. For more detailed instructions please consult your manual.
• To get to the controller setup page, at the main menu, click on hardware setup and then click on Input.
• From the Input page you will need to click on HOTAS control.
• Under the HOTAS control section you will need to assign your Saitek Pro Flight Rudder Pedals to your rudder.
6