Heater, air conditioner and audio system
3
—
Air flows mainly from foot
outlets.
—
Air flows from defroster
outlets and foot outlets.
—
Air flows mainly from
defroster outlets.
Temperature control lever/dial
This lever/dial allows you to adjust
the temperature of the outlet air.
(Except models without heater)
Air intake lever/Air recirculation
button
position/
button
off
position (Indicator goes out)
Outside air is drawn into the
passenger compartment.
Use this position for normal heater,
or air conditioner operation.
If dust is not raised in front of the
vehicle, this position is effective to
prevent dust entry.
position/
button
on
position (Indicator comes on)
Interior air is recirculated inside
the vehicle.
Move the air intake lever to this
position/push the”
” button to
the on position when driving on a
dust raised road or to avoid traffic
fumes.
WARNING:
Do not use in this position for long
periods of time because it may
cause the interior air to become
stuffy and the windows to fog up.
Air conditioner button (If so
equipped)
This button is provided only for
vehicles with an air conditioner.
Start the engine, move the fan
control lever/dial to the desired (1
to 4) position and push the air
conditioner button to turn on the
air conditioner. The indicator light
will come on when the air
conditioner is on. To stop the air
conditioner, push the switch again
to return it to the original position.
The air conditioner cooling
function operates only when
the engine is running.
WARNING:
Positioning of the heating or air
conditioning controls should
not be done while driving, in
order that full attention may be
given to the driving operation.
HEATER OPERATION
Heating
This mode is used to direct hot air
from the floor outlets.
1.
Move the air intake lever to
the”
” position, or push
the”
” button to
the off
position for normal heating
.
2.
Move the air control lever/dial
to the
position
.
3.
Turn on the fan control
lever/dia
l.
4.
Move the temperature control
lever/dial
to
the
desired
position between the middle
and the “HOT” position
.
Ventilation
This mode directs outside air from
the side and center vents
.
1.
Move the air intake lever to
the”
” position, or push
the”
” button to the off
position
.
