4-14
Starting and driving
SHIFTING OF
TRANSFER
－
ELEC.
TRANSFER
TO SHIFT ELEC.
TRANSFER SWITCH
SHIFT PROCEDURE FOR MODELS WITHOUT FREE-RUNNING HUBS
FROM “2H TO “4H”
Shift the transfer switch to "4H" under the speed of 40km/h (25MPH).It is not necessary to depress the clutch pedal.
Perform this operation when driving straight. Then the indicator light would be green.
From “4H” to “2H”
●
Move the transfer lever to “2H”. This can be done at any speed below 80 km/h, and it is not necessary to
depress the clutch pedal. Perform this operation when driving straight.
●
CAUTION:
●
For the 2WD operation, auto-locked and idle operated wheel hub will be separated after the vehicle reverse 1
meter.
●
Stop and reverse 1 meter before driving forward.
●
When reversing, stop and drive straight 1 meter and reverse 1 meter. Separating of the auto-locked and idle
operated wheel hub is good for save fuel, reduce noise and the abrasion.
●
If the indicator light is still on after shifting from "4H" to "2H", you must change to 2WD states by
accelerating, decelerating or reversing for safe insurance.
From “4H” to “4L”
8.
Stop the vehicle and keep the engine running.
9.
Depress the clutch pedal.
10.
Shift the transfer switch from
“
4H
”
to
“
4L
”
smoothly and quickly.
11.
The 4WD indicator light should be yellow. Drive the vehicle after the light is steady.
From
4L” to “4H”
a)
Stop the vehicle and keep the engine running.
b)
Depress the clutch pedal.
c)
Shift the transfer switch from
“
4L
”
to
“
4H
”
smoothly and quickly.
d)
The 4WD indicator light should be green Drive the vehicle after the light is steady.
For AUTO
TRANSMISSION vehicle:
Do not shift the transfer switch from "4H" to "4L" , "4L" to "4H" ,"2H" to "4L" or "4L" to "2H". Well it is very hard to change the transfer switch.
