73
5.6.5 Set NTP server
Use the
Set NTP Server
page to set parameters for a NTP (Network Time Protocol) server to
synchronize the device time with the atomic clock.
Select a server and enable it using the drop down menus. Enter a time period using the keyboard to
indicate the period after which the time is resynchronized. Click
Done
when all parameters are entered
correctly. Click
Undo
to revert to original settings.
5.6.6 System configuration
Use the
System Configuration
page to set the following parameters for the VP-100.
• Running mode
– sets the operation and control mode.
• TCP/IP setting
– configures TCP/IP. Fill in the IP address and subnet mask settings.
• ISP setting
– sets up dial-up parameters for sending E-mails.
• Account Setting
– sets up the administrator and user, and their passwords.
• COM1/2 Port Setting
– sets up the serial ports.
• Set IP Registry Host IP Address & Path
– sets up the registry server.
5.6.7 Set serial ports
The RS232 serial ports (COM1 and COM2) are used to attach PTZ camera control cables, external
modems, or GPIO modules to the VP-100. Use the Serial Port menu to set parameters for the two serial
ports.
