SAINT-GOBAIN Norton Clipper CWT 315, Руководство по эксплуатации

Страница: 25 / 36

VERS. 2022.10.14 CWT 315_MAN_EN
25
6.3 USE OF THE SQUARE GUIDE
The machine is equipped with a parallel square to perform longitudinal cuts. After
setting the measurement (ENGINE OFF),
lock the square with the special locking knob (1 Fig.10).
The square can be adjusted longitudinally by releasing the knob (2 Fig. 10).
The square can also be used in the lowest measure by changing the position of the
knob 5 (2 Fig.11).
To use the transversal square, proceed to the desired angle by acting on the knob
(a fig. 12).
Fig. 10
Fig.11
t
o
Fig. 12