SAINT-GOBAIN Norton Clipper CG180, Руководство по эксплуатации

Страница: 5 / 12

6

Do not use the tool in an environment with danger of explosion.

Do not grin into asbestos-containing materials.

Modifications of the tool are prohibited.

Never use the machine without dust guard.
Use machine with partly removed dust guard in corners only.
For other applications the dust guard must always be closed.

Always check the tool, cable and plug before use and plug before use.
Have damages only repaired by specialists.
Insert the plug into the socket only when the tool switch is off.

When you work outside, the machine has to be used with a fault-
current circuit breaker with max. 30 mA.

The machine should only work under supervision of somebody.
Plug and switch the machine off if it is not under supervision, in case of
putting up and stripping down the machine, in case of voltage drop or
when fixing or mounting an accessory.

Switch the machine off if it stops for whatever reason. You avoid that it
starts suddenly and not under supervision.
 Don’t use the machine if a part of the housing is damaged or in case of
damages on the switch, the cable or plug.

Pay attention that the speed indicated on the grinding wheel meets or
is higher than the max. speed indicated on the machine.

Grinding wheels have to be stored and used carefully according to the
instructions of the producer.

Check the accessories before use. Do not use any products which are
broken, cracked or damaged in another way.

Before use, make sure that the tool is correctly fixed and fastened.
Let it run idle for about 30 seconds in a safe position. If considerable
vibrations occur or if other defects are recognised, switch off
immediately.

Always lead the mains and extension cable as well as the extraction
hose to the back away from the machine.

Power tools have to be inspected by a specialist in regular intervals.

Never carry the machine at its cable.

Do not touch rotating parts.

Persons under 16 years of age are not allowed to use the tool.

During use, the operator and other persons standing nearby have
to wear suitable ear protectors, a dust mask, safety goggles and
protective gloves.

Make sure that persons in the work space are not endangered by
particles flying around.

Keep the handles dry, clean and free of oil and grease.

During operation, always hold the tool with both hands.