background image

A2CH3 F16 – OPERATING INSTRUCTIONS 

 

 

INDEX DATE  N° 

00 06/02/09 

DC69020 

 

2/16

 

I – General  

 

I.1 – Introduction 

 
The Model A2CH3 F16 of the AstiPure II pump range is a pneumatically operated 

TEFLON

®

 pump. 

There are no internal or external metal parts. 
The pump is designed for handling corrosive or high purity fluids. It meets the requirements of the 
semiconductor, photovoltaic, pharmaceutical and chemical industries. 
 

I.2 – Materials 

 

All wetted parts are manufactured in 

TEFLON

®

 PFA HP and PTFE. Other parts are made of high-tech 

plastics such as ETFE, PEEK etc. 

There are no metal parts.

 

 

I.3 – Operation 

 
The pump is pneumatically operated; two bellows joined by a central shaft reciprocate horizontally. 
The suction and delivery strokes alternate from one side of the pump to the other.  
 
The pump is self-priming and has four balls, which seat on

 

lip seals (check valves). 

 
Pulsation dampers with no metal parts are available as an option. They reduce the flow and pressure 
variations of the pump. 
 

I.4 – Pump Data 

 
Flow rate 

16 gpm or 60 lpm – 3600l/h 

Discharge pressure 

65 PSI max. or 4.5 bar – please contact us for higher values 

Suction head 

14 feet water column or 4 meters  

Max. air consumption 

225 Nl/min 

Connections 

3/4”X1" or 22x25 mm 

TEFLON

®

 flared tube 

Air connection 

3/8 NPT ID female thread 

 

Tubing Ø 5/16"x3/8" or 08x10 mm 

 

10 feet or 3 m (starting from pressure regulator) 

Weight 

16 lbs or 8 kg 

 
 

II – Quick checklist 

 

II.1 – Shipment 

 
Pumps are cleaned and assembled in our clean room, then double sealed in plastic bags to ensure 
they are not contaminated in transit. They are then packed in cartons with Polyethylene protection. 
 
Note: we take a maximum of precautions so that our pumps are delivered completely dry. 
Nevertheless, it may be that residual traces are present due to final tests with DI water. 
 

II.2 – Reception 

 
Upon receipt of the pump, please check that: 

  The carton has not been damaged in transit. If there is any visible damage, immediately contact 

the carrier.  

  The pump is not damaged. If there are signs of damage, you should report this immediately to 

SGPPL FRANCE or your local distributor. 

  An operating instruction manual has been included in each package. Please request another copy 

if it has not been included. 

Содержание AstiPure II series


















Отзывы: