18
Press
[MENU]
key, then press
[MENU]
again to enter into first-layer menu. Press
key to select group “CTC/DCS”, press
[MENU]
to confirm and enter
into second-layer menu. Press
key to select item “C-CTC/DCS”,
press
[MENU]
to enter into parameter setting.
Press [# A/B] key to switch between OFF---CTCSS---DCS(+)---DCS(-). Further press
key to select the desired CTCSS/DCS code. CTCSS/DCS code can also
be input by keypad directly.
RX CTCSS/DCS setting (R-CTC-DCS)
The split RX CTCSS/DCS can be set separately.
Press
[MENU]
key, then press
[MENU]
again to enter into first-layer menu. Press
key to select group “CTC/DCS”, press
[MENU]
to confirm and enter
into second-layer menu. Press
key to select item “R-CTC/DCS”, press
[MENU]
to enter into parameter setting.
Press [# A/B] key to switch between OFF---CTCSS---DCS(+)---DCS(-). Further press
key to select the desired CTCSS/DCS code. CTCSS/DCS code can also
be input by keypad directly.
TX CTCSS/DCS setting (T-CTC-DCS)
The split TX CTCSS/DCS can be set separately.
Press
[MENU]
key, then press
[MENU]
again to enter into first-layer menu. Press
key to select group “CTC/DCS”, press
[MENU]
to confirm and enter
into second-layer menu. Press
key to select item “T-CTC/DCS”, press
[MENU]
to enter into parameter setting.
Press [# A/B] key to switch between OFF---CTCSS---DCS(+)---DCS(-). Further press
key to select the desired CTCSS/DCS code. CTCSS/DCS code can also
be input by keypad directly.
NOTE: Except from the common standard CTCSS/DCS code, the non-standard
CTCSS/DCS code can also be inputted in this transceiver.
CTCSS/DCS scanning (CTC/DCS Scan)
This transceiver will scan any CTCSS/DCS code which may be used in the current
frequency. When a CTCSS/DCS code is scanned, the CTCSS/DCS scanning will stop.
Press
[MENU]
key, then press
[MENU]
again to enter into first-layer menu. Press
key to select group “CTC/DCS”, press
[MENU]
to confirm and enter
into second-layer menu. Press
key to select item “CTC/DCS Scan”,
press
[MENU]
to activate CTCSS/DCS scanning function. Press
[EXIT]
to exit.
During CTCSS/DCS scanning, press
key to change the CTCSS/DCS
scanning direction of forward or backward.
SIGNALING GROUP
Signaling type setting
Four options for signaling type are available: OFF---2 Tone--- 5 Tone---DTMF
Содержание RST599
Страница 15: ...10 23 59 Time display Current frequency display Channel number...
Страница 16: ...11 Radio illustration...
Страница 41: ...36 QT DQT sheet...
