18
To adjust the alarm parameter, Touch the [+] or [-] key to increase or decrease the alarm
settings, or Touch and hold the [+] or [-] key for three seconds to increase or decrease the
alarm settings rapidly.
Press the ALARM key to turn on (the alarm icon will appear ) and off the alarm.
Press the SNOOZE key once at any time to return to the normal mode. After 30 seconds of
inactivity, the alarm mode will time out and return to normal mode.
The following is a list of the individual alarm parameters that are set (in order):
1.
Alarm hour(alarm 1)
2.
Alarm minute(alarm 1)
3.
Alarm hour(alarm 2)
4.
Alarm minute(alarm 2)
5.
Wind Gust high alarm
6.
Wind Average high alarm
7.
Outdoor temperature high alarm
8.
Outdoor temperature low alarm
9.
Outdoor humidity high alarm
10.
Outdoor humidity low alarm
11.
Outdoor feels like high alarm
12.
Outdoor feels like low alarm
13.
Outdoor dew point high alarm
14.
Outdoor dew point low alarm
15.
Rainfall (1h) high alarm
16.
Rainfall (24h) high alarm
17.
Absolute pressure high alarm(ABS)
18.
Absolute pressure low alarm(ABS)
19.
Absolute pressure high alarm(REL)
20.
Absolute pressure low alarm(REL)
21.
Indoor temperature high alarm
22.
Indoor temperature low alarm
23.
Indoor humidity high alarm
24.
Indoor humidity low alarm
Note:
To prevent repetitive alarming of humidity, there is a 4% tolerance band. For
example, if you set the high alarm to 60% and silence the alarm, the alarm icon will
continue to flash until the humidity falls below 56%, at which point, the alarm will reset
and must increase above 60% to activate again.
8.4 Alarm and Command Key Beeper ON/OFF Mode
The beeper can be silenced for both alarms and key strokes.
In normal mode, press and hold the
ALARM
key for three seconds to toggle the beeper on
or off (depending on the current setting).
The
BZ ON
(beeper on) or
BZ OFF
(beeper off) icon will appear in the time area for three
seconds. Press and hold the
ALARM
key again for three seconds to toggle the
BZ ON
or
BZ OFF
command.
9. Other Console Features
