41
Problem
Solution
Wireless
remote
not
reporting in to console.
There are dashes (--.-) on
the display console.
If any of the sensor communication is lost, dashes
(--.-) will be displayed on the screen. To reacquire
the signal, press and hold the C button
for 3 seconds, the remote search icon
will be
constantly displayed. Once the signal is reacquired,
the remote search icon will turn off, and the current
values will be displayed.
The maximum line of sight communication range is
100m(330ft) and 30m(100ft) under most conditions.
Move the sensor assembly closer to the display
console.
If the sensor assembly is too close (less than
1.5m/5ft), move the sensor assembly away from the
display console.
Install a fresh set of batteries in the remote sensor.
For cold weather environments, install lithium
batteries.
Make sure the remote sensors are not transmitting
through solid metal (acts as an RF shield), or earth
barrier (down a hill).
Move the display console around electrical noise
generating devices, such as computers, TVs and
other wireless transmitters or receivers.
Move the remote sensor to a higher location. Move
