12
Replace the battery door, and unfold out the desk stand to place the
console in the upright position.
Note:
The battery is a back-up of weather station console, saving
console settings when powered off from adaptor
3.4.3 Connect Sensor with Display Console
Once the display console is powered up, it will automatically scan all the
nearby Integrated Outdoor sensors.
Note:
Do not press any button until all the remote sensors report in the
display screen, otherwise the display console will terminate to connect with
remote sensors.
Note:
While in the search mode, the remote search icon
will be
constantly displayed until all the measured values received. The console
will automatically switch to the normal mode from which all further settings
can be performed.
When connected with the Integrated Outdoor Sensor, the measured value
(Indoor temperature,humidity,pressure,moon phase,time,wind speed,wind
gust,wind direction,rain,outdoor temperature and humidity) will show up on
the display console.
Note:
Make sure that the distance between weather station sensors
and display console should be within 10ft (3m) to 100ft (30m). If the
weather station sensors is too close or too far away, it may not receive a
proper signal.
3.5 Sensor Operation Verification
