18
Figure 10
Step 2:
Console operation set to Southern Hemispheres(
SOU
in the time
area) in Location division. (Check the detailed step of setting the time area
in the part 15 of Chapter 7.2)
Note:
The location division (NOR or SOU) on the Display Console and
the directions of the sensor have to be adjusted to match with your real
location.
If the wind direction sensor is not positioned correctly during installation,
permanent wind direction error will be introduced.
5.1.3 Mounting & Fixing the Sensor Horizontally
Fasten the integrated outdoor sensor to the mounting pole brackets with
foot-mounting
，
two Ø3 bolts and M3 nuts.
Then, tighten the mounting pole to your existing mounting pole with the four
bolts ( Ø5) and nuts (M5) , or fix it on the flat surface with four tapping
screws, as show in Figure 11.
South
North
