Sailrite Fabricator, Руководство пользователя

Страница: 50 / 80

47 | Sailrite.com
To set the machine’s timing:
1. Tilt the machine back and remove the slide
plate by sliding it all the way to the left until it
comes off of the machine ( Figure 83 ).
2. Raise the presser feet and rotate the balance
wheel until the needle is at the highest position.
Remove the needle plate and the feed dog;
each is held in place by two screws ( Figure 84 ).
3. Ensure that the stitch length indicator is set
to its lowest setting by pressing the “PUSH” tab
and rotating the knob clockwise toward the 1mm
stitch length ( Figure 85 ).
83
84
85
NEEDLE PLATE SCREWS
FEED DOG SCREWS