33
|
Sailrite.com
1. Raise the needle bar to its highest position by
rotating the balance wheel.
2. Thread comes off the top of the cone to the
thread stand arm (
A
).
3. Pass the thread toward you through the far
right hole of the three hole thread guide (
B
); then,
up over the top and through the leftmost hole.
4. Pass the thread through the top hole of
guide (
C
), bring thread around to the front, then
through the bottom hole of guide (
C
).
5. Pull the thread over the top of and between
the tension disks (
D
), then down through (
E
).
6. Pass the thread around and between the
tension disks (
F
), in a clockwise motion being
sure the thread goes all the way to the core post.
7. Pass the thread up through the thread take
up spring (
G
).
8. Pass the thread under the thread guide (
H
).
9. Lead the thread upward through the
elongated thread finger (
I
) and then through the
take-up arm (
J
) from right to left.
10. Lead the thread down through thread finger
(
K
) then (
L
) and then through the needle bar
thread guide (
M
) from front to back.
11. Pass the thread from left to right through the
eye of the needle (
N
) and draw the thread about
4 inches through the needle eye.
Threading the Sewing Machine
C
D
E
F
G
H
I
J
K
L
M
N
M
N
Содержание Fabricator
