18
Setting Default CES
When the user is initiating a call, it is optional to enter a specific CES
ID. If CES ID is omitted when initiating the call, the system automati-
cally inserts the ID of the default CES. The user has the possibility of
changing the default CES. The default CES is specified for each of
the 4 Ocean Regions and for normal calls, DISTRESS calls and
stand alone calls.
When specifying default CES:
1.
Push SHIFT key to enter shifted functions.
2.
Push 8 key to enter function menu.
3.
Push # key to enter “Setup” menu.
4.
Use arrow up/down to select “CES” item.
5.
Push # key to enter “CES” item.
6.
Push # key to enter default item.
7.
Use arrow up/down key to select Ocean Region.
5.
Use arrow up/down to select “Configure” item.
6.
Push # key to enter “Configure” item.
7.
Push # key to enter “Call Groups” item.
The display will show:
8.
Use arrow up/down to scroll true the parameters for
all 8 call groups.
9.
Push # key to enter selected parameter.
10. Use arrow up/down to change the value for
the selected parameter.
11. Push # key for the change to take effect.
The following rules have effect, using call groups:
·
When all call groups is disabled (factory default), the extension is
used as inmarsat ID.
·
The local number for phones (connected to X41 or X42) is the
same as the extension and therefor two phones can’t be member
in the same call group.
CALL GROUP 1
> Status:
Off
Number :
1
Mode :
Com
·
If the local number for a handset can’t be found in any enabled
call group, the extension for the handset is used as Inmarsat ID
for outgoing calls.
·
When the Inmarsat ID for a incoming call is specified as a
dedicated call group, the phones is always evaluated first for a
member of the call group. If no phones are member of the call
group the handsets are evaluated. If no handsets are found as
member of the call group, the call will be send to all handsets.
