Sailor RT5022, Руководство по эксплуатации

Страница: 21 / 60

17
Detail
After having pressed OK the contact information
looks as the following:
Add Contact 2 . 3
Name : A n d ers F is k er
PSTN no :
OK/ c h ange <M enu / b ac k
MM S I no :
When the necessary data has been entered
is pressed. If neither a valid MMSI number,
nor a PSTN number is entered, no contact is added
to the Contact list.
4.5.4 Editing The Contact List
Any contacts from the list can be edited using a similar principle as described above using
menu item 2.4.
4.5.5 Deleting a Contact Entry
Any contact can be deleted from the contact list. If menu 2.5 is selected the contact can be
searched for in the list. When found and selected the following window appears:
Delete Contact 2 . 5
MM S I no : 00 345 6789
PSTN no : 00 45 6809876 5
OK/d elete <M enu / cancel
Name : Peters O il
A push on OK will delete the contact.
4.6 Settings for DSC
The following sections describe the settings that can be applied to different call types.
4.6.1 Special Calls
It is configurable via the service interface if the VHF shall support transmission of All Ships
DSC urgency messages with second tele-commands:
• Medical transports
• Ships and Aircrafts
These settings can only be changed from service interface. Reception of these calls are
always possible.
If the VHF is configured for using these calls it will work the following way:
• After powering up (normally) the VHF it will not be possible to use these call types
(message: “Call type not enabled in VHF” if selected.)
• Each of the call types can be enabled via the menus 4.5.3. (the filled square
indicates the call type is enabled).
• After enabling the call property can be added in an All Ships Urgency call sequence.
0505