15
0424
Trouble shooting
The status LED on the Iridium SSAS Box will flash in case the
communication with the GPS or the Iridium Transceiver fails. (Refer
cable connection)
Slow flashing: No contact with Iridium transceiver unit
Fast flashing:
GPS signal is missing or the check sum is wrong
Factory reset
The SSAS control box can be reset by removing power from the Unit.
Press the test button while applying power again.
All configuration parameters will be set to default and the user
settings are lost.
Possible problems
The alert is activated and the status LED is flashing slowly to
indicate that there is no contact to the Iridium transceiver. The alert
mode cannot be deactivated.
-
The service centre number may be wrong for which reason the
Iridium transceiver cannot be initialised.
-
Make a factory reset.
It is not possible to get in contact with the Iridium SSAS Box via the
LAN interface. The IP address is forgotten.
-
Make a factory reset.
IP address is now 192.168.2.40
Test mode will not start when pressing the test button.
-
Check whether a serial data cable is connected to the PC port
and whether a PC program is using the PC port. Stop the PC
program and press the test button again.
Can not receive SMS on a GSM mobile phone.
-
Only in US SMS messages can be send to a cellular phone. In
the rest of the world SMS messages can only be send between
Iridium satellite phones.