11
Connection Scheme for push
Terminals
39287
ALERT 1
ALERT 2
TEST
GPS
POWER
REF
CNT
LED
NMEA +
NMEA -
BAT -
BAT +
10 -32V DC
DC +
DC -
NMEA +
CNT
NMEA -
LED
REF
REF
LED
REF
CNT
LED
REF
CNT
LED
REF
CNT
LED
REF
CNT
Cable Dimensions
Cable for buttons
2 x 2 x 0.5mm
2
Twisted pair and shielded
Cable for power supply
3 x 0.5mm
2
Cable for GPS / NMEA
2 x 0.5mm
2
Shielded
Software Settings
How to access the Iridium SSAS Box
The service interface is made via the LAN interface. The Iridium
SSAS Box has an HTTP server with its own web pages for configu-
ration, status and software upgrading.
The Iridium SSAS Box has it own IP and MAC address.
The Iridium SSAS Box default IP parameters:
IP address:
192.168.2.40
Subnetmask:
255.255.255.0
Default gateway:
0.0.0.0
The IP address can be changed to fit any other local network. When
changing the IP address you must make sure to write down the new
addresses on the IP Address Label
The IP address can be set back to default by switching off the power
from the Iridium SSAS Box and pressing down the test button when
power is switched on again. (The Test button terminal on the board
can be short-circuited during power up).
Connecting a PC to the LAN
Using a cross cable, HUB or switch:
The network settings on the computer must be set to same logical
net as the Iridium SSAS Box. The node number must be set
differently from the Iridium SSAS Box. The subnet mask must be the
same.
How can I see or change the PC IP address?
This description applies only for windows operating systems win95/
98/ME.
A PC stores the IP address in the Network Neighbourhood settings.
To see the PC IP address, right click on the Network Neighbourhood
icon on the desktop. Select the Configuration tab, scroll down the list
of network components and select the TCP/IP protocol associated
with the computers network card. Note that in the example below,
0410