WSK INTELLIGENT TEMPERATURE AND HUMIDITY CONTROLLER
WSK INTELLIGENT TEMPERATURE AND HUMIDITY CONTROLLER
USER MANUAL v 1.0
Thanks for choosing the Intelligent temperature and humidity controller
of our company. In order to convenient you to buy and use the controller
with safety, please read this manual carefully and note the following points.
CAUTION
1. The device must be installed and maintained by professional personnel
2.
The signal and power supply must be cut off before any operations to the
internal or external part of the controller
The following conditions will cause damage or abnormality to the controller
1. Auxiliary power source voltage over range
2. Distribute system frequence over range
3. Current, voltage input poles incorrect
4. With electric pull out communication plug
5. No according requirement to connect termin
al
Warning
1. Wiring warning
If the equipment failure or error occurs, can cause system fault, installation
of external protection circuit to prevent such incidents
In order to prevent the equipment damage or failure, choose the appropriate
fuse protection to prevent the power cord and input, output, strong current shock
2. Power supply
In order to prevent the equipment damage or failure, please use the rated
power
To prevent electric shock, or equipment failure, all wiring complete rear can
supply
3. Prohibited to use in the vicinity of flammable gas
As fire, explosion or equipment damage, banned in flammable, explosive
gas, venting occasion use
4. It is forbidden to touch the instrument inside
To prevent electric shock or burn, it is forbidden to touch the instrument
inside, only the company service engineer can check the internal wiring or
replacement parts. Instrument with
high pressure and high temperature parts. Very dangerous.
5. It is forbidden to change instrument
In order to prevent accidents or equipment failure, it is forbidden to change
equipment
6. Maintenance
Scrapped to prevent electric shock, instrument or fails, only the company's
service engineer can be replacement parts
In order to ensure the instrument is continuous and safe use, should be
regular maintenance. Instrument internal some parts may be damaged with
longer duration of use
CATALOG
1. Introduction
…………………………
2
.
Technical
Data
………………………………
2
3.Definition and Specification Matching
………
3
4. Outline
、
installation hole and wiring
………
4
5
.
PanelExplain and Each function
………………
5
6. Operation Process
…………………………
6
-
12
………
1