background image

-  16  -

1. WARNING

2. INTRODUCTION

3. TECHNICAL DETAILS

 

 

 

 

 

 

 

 

          Raider 300

Pneumatic 

cylinder 

      Ø 

95 

mm. 

 

Unit 

supply 

      Treated Compressed Air

Engine 

stroke 

       68 

mm.

Maximum air consumption (60 cycles/Minute) 

 

370 Litres/minute

Maximum pressure at air inlet 

 

 

 

 

6.5 bar

Minimum Ø of supply hose   

 

 

 

 

6 mm.

Lubricator 

Oil 

       SAE 

10

Packing Gland Oil    

 

     

           SAGOLA 30090098 Lubricant

Maximum Pressure at the product outlet 

      

 

   200 bar (2,900 psi)

Free flow-rate (60 cycles/minute) 

 

      

 

    1.80 litres/minute

Flow-rate per cycle   

 

 

      

 

 

  30 c.c.

Air inlet 

 

 

 

                  1/4” H SAGOLA Fast Connector 11020420 

Product Inlet   

 

 

 

 

                Tube  Ø12xØ21

Product Outlet  

 

 

 

 

            

GAS BSP M

MAXIMUM Spray air cap size  

 

 

 

     

     0.013” 

 

 

Dimensions: 415x390x745 mm.

Net Weight: 15.5 kg.

Maximum operating temperature of 50

o

C

Work pressure engraved on the Gun

CE Approvals   

 II 2G X

Before starting the unit you must read, take into considera-

tion and comply with all the indications described in this 

Manual.
This manual must be kept in a safe place, accessible to all 

users of the unit.
The unit must be started and handled exclusively by 

personnel instructed in its use and must be employed only 

for the purpose for which it was designed.

Likewise, accident prevention standards, work centre 

regulations and directives and current legislation and 

restrictions must be taken into consideration at all times.
SAGOLA S.A., the SAGOLA logotypes and other SAGOLA 

products mentioned in this manual are registered trade-

marks or brand names of the company SAGOLA S.A.

This unit belongs to the family of devices designed to spray 

products with compressed air by means of a spray gun. 

They provide a high level of product transfer (T > 65%) and 

excellent quality finish, as well as low levels of contamina-

tion.
The equipment consists of the following standard features:
- Pump model RAIDER 300

- Instruction manual

- Case

As optional and complementary elements of the equip-

ment, in this Manual the following are included:
-Product hoses

-Airless and Mixed Gun

-Spray air caps:

 

- Fixed Spray Fan

 

- Rotational (Self-cleaning)

 

- Mixed

Unit featuring a pneumatic cylinder that activates the 

hydraulic device which provides the pressure necessary to 

spray the product.

The unit is supplied:
- With a suction probe, which is inserted directly in the 

container of the product to be applied.

Содержание RAIDER 300












Отзывы: