background image

 

 

Introduction 

Thank You for choosing a Sagitter products!  
Please refer to the instructions and warnings contained in this user manual, please retain it for 

future reference. 
This manual contains information about the installation and use of the device. 
The information contained in this publication has been carefully prepared and checked. However, 

it is not assumed any responsibility for any inaccuracies. All rights are reserved and this document 

cannot be copied, photocopied, reproduced in whole or in part without previous written 

permission of PROEL. PROEL reserves the right to make, without notice, any aesthetical, functional 

or design changes or modifications in every one of its products. PROEL doesn't assume any 

responsibility for the use or application of the products here described. 

PACKAGING, SHIPPING AND COMPLAINT 

 

This unit package has been submitted to ISTA 1A integrity tests. We suggest you control the 

unit conditions immediately after unpacking it. 

 

If any damage is found, immediately advise the dealer. Keep all unit packaging parts to allow 

inspection. 

 

Proel is not responsible for any damage that occurs during shipment. 

 

Products are sold “delivered ex warehouse” and shipment is at charge and risk of the buyer. 

 

Possible damages to unit should be immediately notified to forwarder. Each complaint for 

manumitted package should be done within eight days from product receipt. 

WARRANTY AND PRODUCTS RETURN 

 

Proel products have operating warranty and comply their specifications, as stated by 

manufacturer.  

 

Proel warrants all materials, workmanship and proper operation of this product for a period of 

two years from the original date of purchase. If any defects are found in the materials or 

workmanship or if the product fails to function properly during the applicable warranty period, 

the owner should inform about these defects the dealer or the distributor, providing receipt or 

invoice of date of purchase and defect detailed description. This warranty does not extend to 

damage resulting from improper installation, misuse, neglect or abuse. Proel S.p.A. will verify 

damage on returned units, and when the unit has been properly used and warranty is still valid, 

then the unit will be replaced or repaired. Proel S.p.A. is not responsible for any "direct 

damage" or "indirect damage" caused by product defectiveness. 

MAINTENANCE AND DISCLAIMER 

 

Clean with not scraping sponge or cloth. 

 

Proel S.p.A. reserves the right to change these specifications at any time without notice. 

 

Proel S.p.A. declines any liability for damages to objects or persons caused by lack  of 

maintenance, improper use, installation not performed with safety precautions and at the state 

of the art. 

 

Содержание QUARIUX





















Отзывы: