Sagitter QUARIUX, Руководство пользователя

Страница: 18 / 20

To un-pair all fixtures simultaneously press the red button on the transmitter for 5 second
(Unpairing receivers) : all QUARIUX that are turned on and are paired (status B) will be un-paired
from this transmitter and will be in status A.
To un-pair a single QUARIUX fixture go to LED 3 of page 2: with the LED 3 switched ON (W-DMX is
active), press and hold the ENT key for 5 seconds to un-pair, the correspondent LED 3 will flash
more rapidly for some seconds. At the end the W-DMX BLUE LED turns off and the unit goes to
status A, ready to be paired again.
Attribute Table
QUARIUX RGBW (7 channels) and RGBWZ (8 channels) extended table:
Channel Attribute Name Range Description
1 Red 0-255 0 = No red > 255 = maximum
2 Green 0-255 0 = No green > 255 = maximum
3 Blue 0-255 0 = No blue > 255 = maximum
4 White 0-255 0 = No white > 255 = maximum
5 Dimmer 0-255 Light intensity dimmer from 0 = no light to 255 = full
6 Shutter 0-255 0 = No Shutter
1-255 = Shutter strobe velocity from slow to fast
when channel 7 value is within 15-89 range, this
channel determines the Rainbow velocity, from 0 slow
to 255 fast.
7 Rainbow 0-14
15-29
30-44
45-59
60-74
75-89
90-104
105-119
120-134
135-149
150-164
165-179
180-194
195-209
210-224
225-239
240-255
None
Rainbow fade 100%
Rainbow fade 50%
Rainbow snapstart
R White Fade 100%
R White Fade 50%
Red
Red / Green (Yellow)
Green
Green / Blue (Cyan)
Blue
Blue / Red (Magenta)
White
Red / Green / Blue / White Full
White 3200 K
White 4000 K
White 5600 K
8* Zoom 0-255 SSZ control beam from 12° to 90° (*SSZ only)
18