RTI90-320/500 T2 HD UK
50
Setting network
This feature allows you to define your network
parameters:
1.
Go to
Receiver settings
>
Network settings
.
2.
Define your
Ethernet configuration
:
• Manual
: in this case, enter the figures of each
address required, or
• DHCP
configuration.
Resetting the receiver
1.
Go to
Receiver settings
>
Reset factory default
.
2.
Enter your parental code and press the
key.
A warning message appears.
3.
To cancel the operation, press the
or
key.
To confirm the reset, press the
[
Confirm
] key.
Once the default settings are restored, the receiver
installation screen is displayed. You can then
reconfigure your receiver (see section
Running your
first installation
, page 22).
Note
If you reset the default settings, you lose the channels and settings you made.
This operation does not erase the recordings saved in the recording list.
LU 253335051-B RTI90-320_500 T2 HD UK.book Page 50 Jeudi, 13. octobre 2011 2:50 14
