RTI90-320/500 T2 HD UK
49
Con
fig
uratio
n
Picture settings
1.
Go to
Receiver settings
>
Video settings
.
2.
Check the manuals of your video equipment to know what settings you need.
• HDMI Output
: If your HD TV set is connected
to the receiver with an HDMI cable, select
YES. If you have a standard TV set, select
NO.
• HD Resolution
: select the output resolution
for your HD TV set (1080i, 720p or 576p).
• TV Format
: select the display mode for your
standard TV set: 16/9 (widescreen TV), 4/3
(Traditional TV) or Auto (programme format
will be respected - 16:9 or 4:3).
• Video resizing
: if your standard TV format is
4/3, select the desired resizing mode: Pan & Scan or Letterbox.
• SCART
: If you connected your standard TV set to the receiver with a Scart cable, select TV
mode. If instead, you connected a DVD receiver to the Scart connector, select the receiver mode.
In TV mode, audio volume changes and onscreen messages will be sent to the TV set. In
Receiver mode, none of these operations are sent to the external recording device so that they
do not affect your recordings.
• Video Standard
: select the video standard (PAL or S-Video) best suited for the TV/AUX output.
Audio settings
Check the manuals of your audio equipment to know what settings you need.
1.
Go to
Receiver settings
>
Audio settings
.
2.
If you have connected your receiver to a home
theatre cinema via the Digital audio connector,
set
Digital audio output
to
Dolby
. Otherwise,
leave it to
Stereo
.
3.
If the audio volume varies noticeably between
programmes because of the audio type broad-
cast (Stereo, Dolby, etc.), adjust the volume
(default value is 0 decibel) using the and
keys.
4.
If the sound and picture are not synchronized,
adjust the
AUDIO/VIDEO delay
setting (default
value is 0 millisecond) using the and keys.
5.
Adjust the
Audio description
volume using the and keys.
These settings will apply to all programmes watched on all channels.
LU 253335051-B RTI90-320_500 T2 HD UK.book Page 49 Jeudi, 13. octobre 2011 2:50 14
