Proc Sheet 1 09
myX-3 & myX-5
REMOVING / REPLACING THE LOUDSPEAKER
1/2
Ref. SCT U38 SSC DTS 009 – Index B - December 12 , 2002
Page 5-30
4.66 Tools :
- A 0.6mm torx screwdriver
- Tweezers
4.67 Preliminary operation
1. Remove the back cover (
Proc sheet 0 01
).
2. Remove the battery (
Proc sheet 0 02
).
3. Remove the front cover (
Proc sheet 0 03
).
4. Unscrew the six attachment screws on the electronic board.
5. Remove the assembly display , then the light guide keypad
(Proc sheet 1 02 / 1 03)
6. Remove the electronic board.(
Proc sheet 1 04
)
4.68 Removal procedure :
Notice: do not touch the loudspeaker diaphragm
1. Remove, with the tweezers, the equipped loudspeaker (1) in its housing (2).
4.69 Placement procedure :
1. Put the loudspeaker in its housing, respecting the foolproof device
4.70 Further operations :
1. Remove the electronic board on the assembly plate. .(
Proc sheet 1 04
)
2. Replace the light guide keypad
(Proc sheet 1.03
)
3. Replace the assembly display
(Proc sheet 1 02)
4. Position and tighten the six attachments screws with torx settings of 0,25 N.m.
5. Replace the front cover /battery / back cover (
Proc sheet 0 01 / 0 02 / 0 03)
.
6. Carry out the radio test (
Test Sheet 06
).
Содержание My X-5
Страница 61: ...Site Technical Documentation GSM 900 1800 myX 3 myX 5 Page 5 3 LEVEL 0 MAINTENANCE...
Страница 63: ...Proc sheet 0 01 myX 3 myX 5 REMOVING REPLACING THE BACK COVER 2 2 Ref SCT U38 SSC DTS 009 Index B Page 5 4...
Страница 106: ...Site Technical Documentation GSM 900 1800 myX 3 myX 5 Ref SCT U38 SSC DTS 009 Index B December 12 2002 Page 8 3...
Страница 115: ...Site Technical Documentation GSM 900 1800 myX 3 myX 5 Ref SCT U38 SSC DTS 009 Index B December 12 2002 Page 8 3...
