Proc Sheet 1 02
myX-3 & myX-5
REMOVING / REPLACING THE DISPLAY
1/2
Ref. SCT U38 SSC DTS 009 – Index B - December 12 , 2002
Page 5-16
4.31 Tools :
- A 0.6mm torx screwdriver
- gloves
•
This procedure must be performed by an technician provided with gloves , to avoid any risk of
pollution.
•
Contacts of display must be never touched.
4.32 Preliminary operation
1. Remove the back cover (
Proc sheet 0 01
).
2. Remove the battery (
Proc sheet 0 02
).
3. Remove the front cover (
Proc sheet 0 03
).
4.33 Removal procedure :
1. On the electronic equipped module , unscrew the four attachment screws (5) .
2. Remove the assembly display (1) (2) (3).
1. Remove the display ( 3 ), of the support ( 2 ) by pushing it in its centre .
4.34 Placement procedure :
1. Replace the display (3) of the support (2),beginning with the bottom.
2. Replace the assembly display (1) (2) (3) on the electronic equipped module (4).
3. Position and tighten the four attachments screws with torx couple of 0,25 N.m.
4. Verify that there are no impurities on the display.
4.35 Further operations :
1. Replace the front cover (
Proc sheet 0 03
).
2. Replace the battery (
Proc sheet 0 02
).
3. Replace the back cover (
Proc sheet 0 01
).
4. Set the display parameters with OMM software (only for myX-5)
(Test Sheet 01)
5. Carry out the radio test (
Test Sheet 06
).
.
Содержание My X-5
Страница 61: ...Site Technical Documentation GSM 900 1800 myX 3 myX 5 Page 5 3 LEVEL 0 MAINTENANCE...
Страница 63: ...Proc sheet 0 01 myX 3 myX 5 REMOVING REPLACING THE BACK COVER 2 2 Ref SCT U38 SSC DTS 009 Index B Page 5 4...
Страница 106: ...Site Technical Documentation GSM 900 1800 myX 3 myX 5 Ref SCT U38 SSC DTS 009 Index B December 12 2002 Page 8 3...
Страница 115: ...Site Technical Documentation GSM 900 1800 myX 3 myX 5 Ref SCT U38 SSC DTS 009 Index B December 12 2002 Page 8 3...
