Sagem MF 5482, Инструкция пользователя

Страница: 80 / 102

MF5482
- 74 -
12 - PC Features
To print a document in manual duplex mode:
1 Use the P
RINT
command from the F
ILE
menu of the
currently open application on the screen.
2 Select the L
ASER
P
RO
LL2 printer.
3 Check the Duplex box and choose among the two
binding modes:
4 Click on the OK button to begin printing.
5 The machine prints the odd pages (from the higher
odd page to page 1) and the LCD screen displays:
6 Once the odd pages are printed, the LCD screen
displays the message
**P
UT THE PRINTED SHEETS IN
THE PAPER TRAY WITH THE PRINTED SIDE VISIBLE
... :
7 Place the sheets in the paper tray as indicated on
the explanation page and below.
The following illustrations describe the necessary
operations depending on the selected binding
mode:
• Long sides
• Short sides
8 Press OK on the command panel to resume
printing.
9 Even pages are printed on the other side of the
sheets. Once all pages are printed, remove the
explanation sheet.
Important
The duplex printing mode is not
available for PostScript drivers.
The duplex printing mode is
available only in a paper format
managed by the paper tray.
The manual tray cannot be used to
print in duplex mode.
Binding mode Printing
Long sides
Short sides
** PRINTING **
** PC **
** PUT THE PRIN
... AND PRESS <OK>
Important
The PC generates and prints a page
explaining how to reload the sheets
for a duplex job. Read this page
carefully and place it back with the
other sheets.
it is very important that you return
the explanation sheet to the paper
tray to continue printing correctly.
Important
If a paper jam or a paper format
error occurs, the job is cancelled.
You must then resubmit the print job.