Sagem F@ST 1200, Руководство пользователя

Страница: 47 / 82

5 - Configuration
SAGEM F@st™ 1200/1240 User Guide - 252569421-01
Sagem Communication document. Reproduction and disclosure prohibited Page 5-11
RFC1483 Routed
Field Meaning
Network Setting Enable NAT : Check the appropriate box to enable address
translation (NAT) ( Recommended ).
Enable DHCP
: Check the appropriate box to activate the
modem/router's "DHCP client" function.
WAN IP Address
This field is active only when the "DHCP client" function is deactivated
(Enable DHCP field check box not checked).
Enter a WAN IP address.
WAN Subnet Mask
This field is active only when the "DHCP client" function is deactivated
(Enable DHCP field check box not checked).
Enter a WAN subnet mask.
PPPoE
Field Meaning
Network Setting Enable NAT
: Check the appropriate box to enable address
translation (NAT) ( Recommended ).
Authentication Select one of the proposed authentication modes (CHAP or PAP).
User Name
Enter the user name (32 characters maximum) supplied by your
I nternet S ervice P rovider (ISP).
Password Enter the password (32 characters maximum) supplied by your I nternet
S ervice P rovider (ISP).
Dialling
Select:
AUTO
: The PPPoE link will be set up only if there is traffic on the
ADSL line.
DIRECT
: The PPPoE link will always be set up even if there is no
traffic on the ADSL line.
Select DIRECT ( Recommended ).
Idle timeout (min)
Enter a delay (expressed in minutes) after which the PPPoE link will
disconnect in the absence of Internet traffic.