Sagem F@ST 1200, Руководство пользователя

Страница: 17 / 82

2 - Description
SAGEM F@st™ 1200/1240 User Guide - 252569421-01
Sagem Communication document. Reproduction and disclosure prohibited Page 2-7
2.3 Installation instructions
Environment
¾ The SAGEM F@st™ 1200/1240 must be installed and used inside a building.
¾ The room temperature must not exceed 45°C.
¾ The SAGEM F@st™ 1200/1240 should not be exposed to strong sunlight or to strong
sources of heat.
¾ The SAGEM F@st™ 1200/1240 should not be placed in an environment subject to
significant steam condensation.
¾ The SAGEM F@st™ 1200/1240 should not be exposed to splashed water.
¾ The SAGEM F@st™ 1200/1240 casing must not be covered.
Power source
¾ Use a readily accessible mains outlet, near to the equipment. The power supply lead is 2 m
long.
¾ Arrange the power lead so as to avoid any accidental disconnection of the modem/router.
¾ The SAGEM F@st™ 1200/1240 is designed for connection to a TT or TN type power supply
network.
¾ The SAGEM F@st™ 1200/1240 is not designed to be connected to an IT type electrical
installation (power supply with independent neutral).
¾ Protection against short circuits and leaks between phase, neutral and earth should be
provided by the electrical installation of the building. The power circuit to this equipment
should be provided with 16 A overcurrent protection and differential protection.
Maintenance
¾ The unit must not be opened. This must be done only by personnel qualified and approved
by your Supplier.
¾
Do not use liquid or aerosol cleaning agents.