- 15 -
7-4-4 Audio settings
In the RECEIVER SETTINGS menu, select AUDIO SETTINGS.
Navigate using the arrows then confirm your choices with
. Refer to the instruction manual of your
audio equipment for more details about the audio configuration of the equipment.
-
DIGITAL AUDIO OUTPUT
: select the type of audio data for the DIGITAL AUDIO digital output: Stereo
or Home Cinema.
If you choose "HOME CINEMA", when a programme with audio signal of type AC3 is broadcasted, the
signal is directly transmitted to your amplifier. Otherwise, it is the main audio signal that is transmitted to
the amplifier. You can adjust the audio volume output on the home cinema and balance the sound
between the various equipment connected to your home cinema: to do so, select the adjustment setting
then use the
and
keys to increase or decrease the volume.
7-4-5 Return to default factory settings
In the RECEIVER SETTINGS menu, select RESET FACTORY DEFAULT.
This function enables you to restore the default settings of the receiver.
To cancel the operation, press
or
.
If you wish to reinitialise the receiver, press
.
Once the initial configuration is restored, the installation screen of the receiver is displayed. You can then
reconfigure your receiver (see “First installation”, page 10).
Select "HOME CINEMA" mode only if you have connected an amplifier
supporting this mode.
All the channels and parameters will be lost if you confirm this choice, but
the recordings will not be erased.
DVR6200T_6400T_EN.book Page 15 Jeudi, 18. octobre 2007 11:17 11