Sagem Dr. Neuhaus Tainy GMOD-T1, Руководство по установке

Страница: 26 / 31

Entering AT commands
Page 26 of 31 TAINY GMOD-T1
File 3159AD001_V1_3_050701.doc
File saved
01.07.2005
File printed 01.07.2005
State Freigabe
Autor Katharina
Bora
4 Entering AT commands
The device is controlled via AT commands that are transmitted to it
either by the connected application or by manual entry via a
terminal program, e.g.
HyperTerminal .
Enter PIN first Please enter the PIN first before any other AT commands. Until a
PIN has been entered most AT commands will be answered with
ERROR .
Working with a
terminal program To be able to control the device directly via AT commands, use a
terminal program, e.g.
HyperTerminal .
Note the following settings:
Make the connection: via the TAINY GMOD-T1 driver
or
directly via the COM port to which the
device is connected
Speed: 57600 bps
Data bits: 8
Parity: ( N o)
Stop bits: 1
Duplex:
( F ull)
Enabling/disabling local echo
To see your entries on the screen, you may have to enable the local
data echo. To do so, enter the following command:
ATE1
To disable the local data echo, enter the following command: ATE0