Putting the device into operation
Page 10 of 31
TAINY GMOD-T1
File 3159AD001_V1_3_050701.doc
File saved
01.07.2005
File printed
01.07.2005
State Freigabe
Autor Katharina
Bora
11. With your fingernail or a suitable object
move the flap about 2 mm to the right
(in the direction of the arrow) until you
can feel it click into place.
12. Now the SIM card holder is locked into
position.
13. Finally re-attach both housing parts:
Slide the motherboard into the rails on
top and bottom inside the rear section
of the housing. Close the housing by
slightly pressing both housing parts
together so that the clamps on the
upper and lower part of the housing
engage.
The housing is locked when both
clamps have clicked shut.
Rail
