Sagem D60C, Руководство пользователя

Страница: 41 / 52

37
S
ETTINGS
automatic mode you are not required to
specify the preference.
Select the base preference using or .
Press
Valid. .
To exit the menu, press the red key .
Resetting the handset
When you reset your handset, all the
parameters are reset to their initial value
(factory settings) with the exception of the
phonebook, alarms (birthdays and organiser)
and SMS parameters.
On the navigator key , press or
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET. . Press Valid. .
Select SET HANDSET . Press Valid. .
Select RESET HANDSET using or .
Press Valid. .
A confirmation screen will prompt you to
confirm your request:
•
To re-initialise your handset, press
Yes .
• If you do not wish to re-initialise your
handset, press
No .
To exit the menu, press the red key .
When resetting the handset, the
security functions (forbidden
prefixes and time limit duration) are
not set back to their initial value.
Personal registering
To register a handset in the following cases:
•
the base’s code is no longer 0000 (you
have customised the code),
• you own several bases,
• you want to choose a name for your base
(name displayed on the welcome
screen),
• you want to choose the handset
registration number.
On the navigator key , press or
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET. . Press Valid. .
Select SET HANDSET . Press Valid. .
Select PERSON.REGISTR using or ,
Press Valid. .
Select the required base number. Press
Valid. .
Delete the current base name using C key (if
necessary).
Enter the new name, press
Valid. .
Enter the base code. Press Valid. .
The handset enters the registration mode,
"
HANDSET IN REGISTR. MODE " is
displayed on the screen.
Put the base to which you want to register the
handset in registration mode.
Once the handset is registered, select the
required handset number. Press
Valid. .
Livre du D60_GB.book Page 37 Mercredi, 8. décembre 2004 10:01 10