Sagem D60C, Руководство пользователя

Страница: 36 / 52

32
S
ECURITY
the active mode is set automatically.
An information screen presents the new
emergency number.
To activate/deactivate the emergency
number, select the corresponding option.
Press
Valid. .
To exit the menu, press the red key .
The emergency number is automatically
activated. The name of the handset
displayed on the idle screen becomes
EMERGENCY.
Defining the call time limit
You can set your telephone's operating time.
Once the call time limit is used up, it is no
longer possible to make calls.
To be able to call again, you will have to
deactivate the call time limit or set a new limit.
On the navigator key , press or until
the SECURITY screen is displayed, press
OK to confirm.
Select TIME LIMIT using or . Press
Valid. .
An information screen displays the remaining
time limit and its status.
If the time limit ends during a
telephone conversation,
communication will not be cut off.
Once you have hung up, it will not be
possible to make a new call. Calls
between handsets (internal calls)
are not affected by the call time limit.
• To keep the setting, press Confirm .
• To modify the setting, press Edit .
Enter the base code (default is 0000). Press
Valid. .
A list of various executable actions appears:
-
ACTIVATE :To activate the emergency
number.
- DEACTIVATE :To deactivate the
emergency number.
- EDIT TIME : To modify the emergency
number.
Select EDIT TIME using or . Press
Valid. .
Enter the new time limit using the keypad
(maximum 999 minutes). Press
Valid. ,
the active mode is set automatically.
Once the modifications have been made, the
information screen shows the new call time
limit.
To exit the menu, press the red key .
Modifying the base code
The base code ( 0000 being the default
setting) is required to access certain security
functions. It must be composed of 4 digits.
On the navigator key , press or until
the SECURITY screen is displayed, press
OK to confirm.
Select CHANGE CODE using or . Press
Valid. .
Enter the old base code using the keypad
(default is 0000). Press
Valid. .
Livre du D60_GB.book Page 32 Mercredi, 8. décembre 2004 10:01 10