4
Y
OUR
TELEPHONE
Handset set-up
Insert the batteries making sure to respect
the polarity. Place the cover back on the
handset by pushing upwards until it is
completely closed.
Remove the protective film on the screen,
place the handset on the base to fully charge
the batteries.
The charging icon appears on the screen, it
indicates the charging status. Once the icon
is full, your batteries are charged.
Replacing the batteries
Rechargeable batteries must be used with
your handset. Proceed as follows:
Take the handset and turn it around so that
the battery compartment is accessible.
Insert a sharp object (pen, paper clip...)
perpendicularly in hole 1 as shown in the
illustration and lift it upwards, the battery
cover opens, slide it downwards as shown in
2 and insert the batteries making sure to
respect the polarity. Place the cover back on
the handset by pushing upwards until it is
completely closed.
Only use certified rechargeable batteries. For optimal battery charge, leave the
handset on the base for at least 12 hours during initial use. During charging, the
batteries may heat up, this is quite normal and without risk.
1
2
Livre du MD+.book Page 4 Mardi, 30. mars 2004 4:38 16
Содержание D50T
Страница 1: ...Livre du MD book Page 1 Mardi 30 mars 2004 4 38 16...
Страница 82: ...MEMO...