55
Select ADVANCED SET. using
or
. Press Valid
.
Select SET BASE using
or
. Press Valid
.
Select REGISTR.MODE using
or
. Press Valid
.
A screen prompts you to confirm the setting of the base to the registration
mode. Press Yes
to enter the registration mode. The indicator light on
your base starts to quickly blink green.
You base will remain in registration mode for about 1 minute.
Re-initialising the base
When you re-initialise your base, all the base parameters are reset to their
initial values (factory settings), your SMS are not deleted.
On the navigator key
, press
or
until the SETTINGS screen is
displayed, press OK to confirm.
Select ADVANCED SET. using
or
. Press Valid
.
Select SET BASE using
or
. Press Valid
.
Select RESET BASE using
or
. Press Valid
.
A confirmation screen will prompt you to confirm your request:
•
To re-initialise the base, press Yes
.
•
If you do not wish to re-initialise the base, press No
.
Enter the base code using the keypad. Press Valid
.
You can also use the base buttons to put the base in registration
mode:
•
If your base is equipped with an answering machine: Press
simultaneously on the two top buttons on the base for a few
seconds .
•
If your base is not equipped with an answering machine:
Press on the
button on the base for a few seconds.
Return
Valid
SET BASE
Return
Valid
REGISTR. MODE
No
Yes
REGISTR. MODE?
Return
Valid
SET BASE
Return
Valid
RESET BASE
No
Yes
RESET BASE ?
R
S
ETTINGS
Livre du MD+.book Page 55 Mardi, 30. mars 2004 4:38 16
Содержание D50T
Страница 1: ...Livre du MD book Page 1 Mardi 30 mars 2004 4 38 16...
Страница 82: ...MEMO...