Sagem D20T, Руководство пользователя

Страница: 17 / 32

15
H
ANDSET SETTINGS
Activating or deactivating the
beeps
On the navigator key , press or until
the HS SET screen is displayed, press OK to
confirm.
Select BEEPS using or . Press OK.
Select the beep type using or . Press OK.
KEYPAD PRESS: the handset beeps when a
key is pressed.
BATTERY LOW: the handset beeps when
the battery is too low.
OUT OF RANGE: When the base station is
out of range, the handset will warn you
acoustically.
An information screen displays the beep
status (ON or OFF) for the selected item.
•
To change the status, press or .
Press OK.
• To keep the status, press C.
To exit the menu, press the red key .
Modifying the default handset
melody volume
On the navigator key , press or until
the HS SET screen is displayed, press OK to
confirm.
Select MELODY VOL using or . Press
OK.
There are seven alternatives in succession to
choose from: :
•
VOL OFF : No ringing tone.
• VOLUME : X : From 1 to 5.
• CRESCENDO : The volume of the ring
tone increases with every ringing
sequence.
Press or to increase or decrease the
default volume. Once the volume is set,
press OK.
To exit the menu, press the red key .
Modifying the handset ringtone
This menu enables you to associate a
ringtone to incoming calls or internal calls
(intercom).
On the navigator key , press or until
the HS SET screen is displayed, press OK to
confirm.
Select EXTERNAL CALL or INTERNAL
CALL using
or . Press OK.
Select the desired ringtone using or .
Press OK.
To exit the menu, press the red key .
Setting the ear volume
During communication, you can
increase or decrease the audio
volume of your handset by pressing
the
or key on the navigator.
H
ANDSET SETTINGS
LU 251619615_D20T_GB_SAGEM.book Page 15 Jeudi, 26. août 2004 4:54 16