Sagem D16T, Руководство пользователя

Страница: 112 / 132

D16T/D18T/D21T
- 3 -
You can change the display on the screen saver.
For this purpose, press and hold down the key .
To return to the previous display, press and hold down the key .
Place the handset in the base station to charge for 15 hours prior to first use. if you don’t
properly charge the phone, battery performance will be compromised.
9. Plug one end of the telephone line cord into the modular wall phone jack and the other end
into the jack on the base.
10. After charging, press key, you can hear dial tone.
Only use the supplied power adapter, connect it to the base socket according to the
installation instructions provided in this booklet and the indications on the identification
label affixed to it (voltage, current, electric network frequency). As a safety measure, you
can use the power adaptors to cut off the 230V current in case of danger. They must be
located near to the device, and must be easily accessible.
2.3.
Handset keys
Internal call
Microphone
Earpiece
Mute the microphone /
Correction / Cancel
Talk off /
Switch handset on/off
Recall/Flash
Screen
Access to dialled number
Access to menu /
Validadate
Talk on /
Handsfree *
Activate, deactivate keypad lock
Access to phonebook
Navigation key down /
Navigation key up /
Access the caller list
Deactivate handset ringer
* D21T only
2.4.
Base Station
Base button
Pressed briefly:
- telephone set paging.
Held down (4 seconds minimum):
- telephone set registration. Handset location
LU EN final.fm Page 3 Mardi, 23. juin 2009 10:39 10