Sagem D16T, Руководство пользователя

Страница: 119 / 132

English
- 10 -
6. Using the Multi-Handset capabilities
These functions are used for handset management when two or more handsets are registered
on the same base.
6.1.
Intercom Call/Intercom
1. Make sure your handset is on standby mode.
2. Press the key on the handset.
- If your installation has two handsets, the second handset is directly called, and "
intercom
"
followed by the handset number are displayed on the screen.
- The display shows the
INT icon and the number of all registered handsets
- Enter the desired handset number or press the key if you want to call all handsets. All
registered handsets are ringing.
3. On the called handset, press the key to answer.
6.2.
Answering an internal call
1. The ring melody from an internal call is different from an external call. "
intercom
" and the
calling handset number appear on the screen. " " is blinking.
2. Press the key to answer. The " " stop blinking.
3. Ending an internal call press the key.
6.3.
Call management
6.3.1. An external and an internal call
Transfering an external call to another handset registred on same base
1. During a call, press . The external user is put on hold.
2. Enter the internal call number. When the user answers, you can announce the call.
3. Press the key to transfer the call.
Note!
To switch from one call to another, press and hold down the "*" key until an aural
signal is heard.
Note!
If the called handset does not answer, press to take back the call.
Making conference calls (3-way conversation)
You can connect one external call to two handsets registered at the base station. All users can
talk and listen simultaneously:
1. Press key. The external user is put on hold.
2. the internal call number. Wait until the internal user answers.
3. Press and hold key, until an aural signal is heard to start a three-way conference.
"
conference
" is displayed on the handset screen.
LU EN final.fm Page 10 Mardi, 23. juin 2009 10:39 10